Classic Cars 

Messerschmitt KR200- Adorable three-wheeled bubble car produced by German aircraft manufacturer Messerschmitt from 1955

The Messerschmitt KR200, or Kabinenroller (Cabin Scooter), was a three-wheeled bubble car designed by the aircraft engineer Fritz Fend and produced in the factory of the German aircraft manufacturer Messerschmitt from 1955 to 1964.

 Messerschmitt, temporarily not allowed to manufacture aircraft, had turned its resources to producing other commodities. In 1952, Fend approached Messerschmitt with the idea of manufacturing small motor vehicles. These were based on his Fend Flitzer invalid carriage.


1955 Messerschmitt KR200.Source
1955 Messerschmitt KR200.Source

The first of Fend’s vehicles to enter production at Messerschmitt’s Regensburg factory was the KR175. The title Kabinenroller means “scooter with cabin”.While the Messerschmitt name and insignia were used on the car, a separate company, incorporated as Regensburger Stahl- und Metallbau GmbH, was created to manufacture and market the vehicle.

The KR200 replaced the KR175 in 1955. While using the same basic frame as the KR175 with changes to the bodywork (notably including wheel cutouts in the front fenders) and an improved canopy design,the KR200 was otherwise an almost total redesign.The rear suspension and engine mounting were reworked, and hydraulic shock absorbers were installed at all three wheels. Tire sizes were enlarged to 4.00×8.


Instruments and controls of a KR201 Roadster .Source
Instruments and controls of a KR201 Roadster .Source

Retailing for around DM 2,500, the KR200 was considered an instant success with almost 12,000 built during its first year, which was the highest annual production for Kabinenroller models.A maximum speed in excess of 90 km/h (56 mph)despite a claimed power output of only 10 PS (7.4 kW; 9.9 hp) reflected the vehicle’s light weight and low aerodynamic drag.An “Export” package included a two-tone paint scheme, painted hubcaps, a fully trimmed interior, a heater, a clock, and a sunshade for the canopy.

KR200 Kabrio; the folding top replaces the bubble in this version. .Source
KR200 Kabrio; the folding top replaces the bubble in this version. .Source

In 1956, Messerschmitt was allowed to manufacture aircraft again and lost interest in Fend’s microcars. Messerschmitt sold the Regensburg works to Fend who, with brake and hub supplier Valentin Knott, formed Fahrzeug- und Maschinenbau GmbH Regensburg (FMR) to continue production of the KR200 and his other vehicles.

Messerschmitt Kabinenroller in Heidelberg .Source
Messerschmitt Kabinenroller in Heidelberg .Source


In 1957, the KR200 Kabrio model was released, featuring a cloth convertible top and fixed side window frames. This was followed by the KR201 Roadster without window frames, using a folding cloth top, a windscreen, and removable side curtains. A Sport Roadster was later offered with no top and with the canopy fixed into place so that the driver would have to climb in and out at the top of the car.

Messerschmitt Kabinenroller with Yılmaz Onay and Erol Keskin in Turkey. 1968 .Source
Messerschmitt Kabinenroller with Yılmaz Onay and Erol Keskin in Turkey. 1968 .Source


Messerschmitt record car .Source
Messerschmitt record car .Source


1960 Messerschmitt KR200.Source
1960 Messerschmitt KR200.Source


Production of the KR200 was heavily reduced in 1962 and ceased in 1964 as sales had been dropping for a few years. The demand for basic economical transport in Germany had diminished as the German economy boomed.A similar situation developed in other parts of Europe such as in the manufacturer’s biggest export destination, the United Kingdom, where sales were particularly affected by the increasing popularity of the Mini.


Related posts

Support us!

If you like this site please help and make click on the button below!